Gorilla Waterproof Patch & Seal Spray is a flexible, rubberized coating that seals out water, air and moisture. The applicator nozzle has a controlled spray pattern providing a clean, even coat. Once applied, the self leveling formula smoothly covers small gaps and cracks ensuring a watertight seal. When dried, Gorilla Waterproof Patch & Seal Spray is paintable and temperature resistant resulting in lasting repairs!
PRODUCTĀ SPECS:
- APPLICATION TEMPERATUREĀ ā 50Ā°F- 90Ā°F
- SERVICE TEMPERATUREĀ ā -40Ā°F to 160Ā°F
- INDOOR/OUTDOORĀ ā Yes
- UV/SUNLIGHT RESISTANTĀ ā No
- PAINTABLE āĀ Yes
- FLAMMABLEāĀ Yes
- CURED COLORĀ āĀ Clear
- SOLVENT RESISTANTĀ ā No
- Size: 14 oz. (396 g)
DIRECTIONS:
- Clean surface of dirt, dust, grease and oil. Make sure surface is dried completely.
- Shake well. Spray 8ā³ to 12ā³ from surface, covering evenly. A test spray on a disposable object is recommended before applying to your project.
- Apply multiple coats to ensure all cracks and holes have been filled. Allow to cure in between coats and before water exposure. Full cure at 24 hours.
NOTE: Test finished project with light water exposure to ensure all cracks have been filled. If test fails, apply additional coats. Do not use for gaps larger than 1/4.ā Apply between 50Ā° F and 120Ā° F.
PAINTING: Works with both latex and oil based paints. When coating with oil based paints, use a primer first before painting.
TIP: To avoid possible clogging, turn can away from body towards a disposable object, turn upside down and spray a short jet of clear gas after completing job.